Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Device to Ignore the Destination MAC Address of Packets
Context
During network maintenance, traffic is often mirrored and then redirected to a specific device for analysis. In most cases, a device forwards only packets whose destination MAC address is the local Layer 3 interface's MAC address according to routes, and forwards other packets at Layer 2 or discards other packets. If necessary, the device can also forward other packets at Layer 3 after it is configured to ignore the destination MAC address of packets.
This function is often used in traffic mirroring scenarios and is not recommended in other scenarios.
You cannot configure the device to ignore the destination MAC address of packets on the CE12800E.