Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Examples for BGP
This section only provides configuration examples for individual features. For details about multi-feature configuration examples, feature-specific configuration examples, interoperation examples, protocol or hardware replacement examples, and industry application examples, see the Typical Configuration Examples.
- Example for Configuring Basic BGP Functions
- Example for Configuring Basic BGP4+ Functions
- Example for Configuring Basic MBGP Functions
- Example for Configuring BGP Load Balancing and the MED Attribute
- Example for Configuring a BGP Route Reflector
- Example for Configuring a BGP4+ Route Reflection
- Example for Configuring a BGP Confederation
- Example for Configuring the BGP Community Attribute
- Example for Configuring Prefix-based BGP ORF
- Example for Configuring BGP Route Dampening
- Example for Configuring BFD for BGP
- Example for Configuring BFD for BGP4+
- Example for Configuring BGP Auto FRR
- Example for Configuring BGP4+ 6PE
- Example for Configuring BGP-LS