Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the BGP Network Convergence Speed Adjustment Configuration
Procedure
- Run the display bgp peer [ verbose ] command to check information about all BGP peers.
- Run the display bgp group [ group-name ] command to check information about the specified BGP peer group.
- Run the display bgp routing-table dampened command to check dampened BGP routes.
- Run the display bgp routing-table dampening parameter command to check configured BGP route dampening parameters.
- Run the following commands to check route flapping statistics:
- display bgp routing-table flap-info [ regular-expression as-regular-expression ]
- display bgp routing-table flap-info [ as-path-filter { as-path-filter-number | as-path-filter-name } | network-address [ { mask | mask-length } [ longer-match ] ] ]
- Run the display bgp multicast routing-table dampened command to check dampened MBGP routes.
- Run the display bgp multicast routing-table dampening parameter command to check MBGP route dampening parameters.
- Run the following commands to check statistics about flapping MBGP routes:
- display bgp multicast routing-table flap-info [ ip-address [ mask [ longer-match ] | mask-length [ longer-match ] ] | as-path-filter { as-path-filter-number | as-path-filter-name } ]
- display bgp multicast routing-table flap-info regular-expression as-regular-expression
- Run the display bgp slow-peer command to check information about slow BGP peers.