Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the OSPF Packet Retransmission Limit
Context
After an OSPF switch sends a DD packet, an LSU packet, or an LSR packet, if it does not receive an LSAck packet within a specified period, it retransmits the packet. After the number of packet retransmissions reaches a specified limit, the OSPF switch tears down the adjacency relationship.
Procedure
- Run system-view
The system view is displayed.
- Run ospf [ process-id ]
The OSPF view is displayed.
- Run retransmission-limit [ max-number ]
The OSPF packet retransmission limit is set.
By default, no limit is set for OSPF packet retransmissions. The default maximum number of packet retransmissions is 30.
- Run commit
The configuration is committed.