Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the RIPng Network Performance Optimization Configuration
Procedure
- Run the display ripng [ process-id | vpn-instance vpn-instance-name ] command to check the configuration of the RIPng process.
- Run the display ripng process-id database [ verbose ] [ destination-address destination-address [ mask-length ] ] [ interface interface-type interface-number [ neighbor neighbor-address ] ] command to check all activated routes in the RIPng database.
- Run the display ripng process-id interface [ interface-type interface-number ] [ verbose ] command to check information about the RIPng interface.
- Run the display ripng process-id neighbor [ neighbor-address neighbor-address ] [ verbose ] command to check information about RIPng neighbors.
- Run the display ripng process-id route [ destination-address destination-address [ mask-length ] ] [ interface interface-type interface-number ] [ neighbor-address neighbor-address ] command to check all the RIPng routes that are learned from other switches.