Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Suppressing IS-IS
Context
By suppressing IS-IS, you can disable an IS-IS process temporarily without affecting the IS-IS configuration.
Procedure
- Run system-view
The system view is displayed.
- Run isis [ process-id ]
An IS-IS process is created, and the IS-IS view is displayed.
- Run shutdown
The IS-IS process is disabled temporarily.
After the IS-IS process is disabled temporarily, you can still perform the IS-IS configuration but the configuration does not take effect. You can run the undo shutdown command to cancel the suppression.
- Run commit
The configuration is committed.