Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Basic RIPng Functions
Basic RIPng functions include creating RIPng processes and enabling RIPng on interfaces. The basic RIPng functions must be configured before you use RIPng features.
Pre-configuration Tasks
Before configuring basic RIPng functions, complete the following tasks:
Enabling IPv6 on the switch
Configuring IPv6 addresses for interfaces to ensure that neighboring nodes are reachable at the network layer
Configuration Procedure
Creating RIPng processes is the prerequisite for enabling RIPng on interfaces.