Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Basic OSPFv3 Functions
Applicable Environment
Before building OSPFv3 networks, you need to configure basic OSPFv3 functions. That is, you must enable OSPFv3 and specify the interface, area ID and router ID before configuring other functions.
Pre-configuration Tasks
Before configuring basic OSPFv3 functions, complete the following tasks:
Enabling IPv6 capabilities
Making the network layers of the adjacent nodes accessible