Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the BGP Route Selection and Load Balancing Configuration
Procedure
- Run the display bgp routing-table different-origin-as command to check the routes with the same destination address but different origin ASs.
- Run the display bgp routing-table regular-expression as-regular-expression command to check information about routes that match the AS regular expression.
- Run the display bgp routing-table [ ipv4-address [ { mask | mask-length } [ longer-prefixes ] ] ] command to check routing information in a BGP routing table.
- Run the display bgp routing-table community [ community-number | aa:nn | internet | no-advertise | no-export | no-export-subconfed ] &<1-33> [ whole-match ] command to check routing information with the specified BGP community.
- Run the display bgp routing-table community-filter { { community-filter-name | basic-community-filter-number } [ whole-match ] | advanced-community-filter-number } command to check information about routes matching a specified BGP community filter.
- Run the display bgp multicast routing-table [ ip-address [ mask-length [ longer-prefixes ] | mask [ longer-prefixes ] ] ] command to check the MBGP routing table.
- Run the display bgp multicast routing-table statistics command to check statistics about the MBGP routing table.