Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Entering the OSPFv3 Area View
Context
When configuring the switches in the same area, uniformly plan the configuration data. Otherwise, neighbor switches cannot exchange information with each other. This causes congestion of routing information or routing loops.
Do as follows on the switch that runs OSPFv3.
Procedure
- Run system-view
The system view is displayed.
- Run ospfv3 [ process-id ]
The OSPFv3 view is displayed.
- Run area area-id
The OSPFv3 area view is displayed.
The area ID can be entered as a decimal integer or in the IPv4 address format. However, it is displayed in the IPv4 address format.
- Run commit
The configuration is committed.