Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring OSPFv3 Areas
Applicable Environment
To reduce the number of LSAs in the network and enhance OSPFv3 extensibility, define OSPFv3 areas. For some non-backbone areas at the edge of ASs, you can define them as stub areas for further reducing the size of the routing table and the number of LSAs.
Pre-configuration Tasks
Before configuring OSPFv3 area attributes, complete the following tasks: