Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring Costs of Default Routes Sent to Stub Areas
Procedure
- Run system-view
The system view is displayed.
- Run ospf [ process-id ]
The OSPF process view is displayed.
- Run area area-id
The OSPF area view is displayed.
- Run stub [ no-summary ]
The current area is configured as a stub area.
- Run default-cost cost
The cost of the default route sent to the stub area is set.
The parameter cost specifies the cost of the Type 3 default route sent to the stub area. The default cost is 1.
This command applies only to the ABR that is connected to a stub area.
- Run commit
The configuration is committed.