Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Improving Stability of an OSPF Network
Applicable Environment
By configuring timers, you can reduce the number of unnecessary packets transmitted on a network and reduce the load on devices to improve the network performance.
- Setting the Preference of OSPF Routes
- Configuring the Delay in Transmitting LSAs on an Interface
- Configuring the Interval for Retransmitting LSAs
- Configuring Secure Synchronization
- Configuring a Stub Router
- Prohibiting an OSPF Interface from Sending and Receiving Protocol Packets
- Verifying the OSPF Network Stability Optimization Configuration