Verifying the OSPFv3 Route Attribute Configuration

Enterprise

Worldwide

The configurations for the OSPFv3 Route Attributes are complete.

Run the display ospfv3 [ process-id ] interface [ [ area area-id ] [ interface-type interface-number ] | no-peer ] command to check the OSPFv3 interface information.
Run the following commands to check the LSDB information about OSPFv3:
- display ospfv3 [ process-id ] lsdb [ area area-id ] [ originate-router advertising-router-id | self-originate ] [ { external | grace | inter-prefix | inter-router | intra-prefix | link | network | router | router-information | nssa } [ link-state-id ] ] [ resolve-hostname | age { min-value min-age-value | max-value max-age-value } ^* ]
- display ospfv3 [ process-id ] lsdb [ area area-id ] hostname hostname [ { external | grace | inter-prefix | inter-router | intra-prefix | link | network | router | router-information | nssa } [ link-state-id ] ] [ age { min-value min-age-value | max-value max-age-value } ^* ]
Run the following commands to check the OSPFv3 routing table:
- display ospfv3 [ process-id ] routing [ ipv6-address prefix-length | abr-routes | asbr-routes | intra-routes | inter-routes | ase-routes | nssa-routes ] [ verbose ] [ age { min-value min-age-value | max-value max-age-value } ^* ]
- display ospfv3 [ process-id ] routing statistics

This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, IPv4 IS-IS, IPv6 IS-IS, BGP, Routing Policy, and PBR.