Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the RIP Route Receiving Control Configuration
Procedure
- Run the display rip [ process-id | vpn-instance vpn-instance-name ] command to check the running status and configuration of RIP.
- Run the display rip process-id database [ verbose ] command to check all activated RIP routes in the database.
- Run the display rip process-id interface [ interface-type interface-number ] [ verbose ] command to check information about the RIP interface.
- Run the display rip process-id neighbor [ neighbor-address neighbor-address ] [ verbose ] command to check information about RIP neighbors.
- Run the display rip process-id route command to check all the RIP routes that are learned from other switches.