Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the IPv4 Static Route Configuration
Procedure
- Run the display static-route routing-table command to check information about static routes.
- Run the display ip routing-table command to check brief information about the IPv4 routing table.
- Run the display ip routing-table verbose command to check detailed information about the IPv4 routing table.