Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for OSPF
Table 5-22 describes the default settings for OSPF.
Table 5-22 Default settings for OSPF
| Parameter | Default Setting |
|---|---|
| OSPF | Disabled |
| Interval for sending Hello packets | By default, on P2P and broadcast interfaces, the interval for sending Hello packets is 10 seconds; on P2MP and NBMA interfaces, the interval is 30 seconds. |
| Dead interval of OSPF neighbor relationships | By default, on P2P and broadcast interfaces, the dead interval after which an OSPF neighbor relationship expires is 40 seconds; on P2MP and NBMA interfaces, the interval is 120 seconds. |
| Period during which a device acts as a stub router | 500 seconds |
| Bandwidth reference value used to calculate a link cost | 100 Mbit/s |