Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing BGP Statistics
Context
BGP statistics cannot be restored after being cleared. Exercise caution when you clear BGP statistics.
Procedure
- To clear route flapping statistics, run the reset bgp flap-info [ regexp as-path-regexp | as-path-filter { as-path-filter-number | as-path-filter-name } | network-address [ mask | mask-length ] ] command in the user view.
- To clear route flapping statistics on a specified peer, run the reset bgp ipv4-address flap-info command in the user view.
- To clear route dampening statistics and release suppressed routes, run the reset bgp dampening [ ipv4-address [ mask | mask-length ] ] command in the user view.
- To clear MBGP route dampening statistics, run the reset bgp multicast dampening [ ip-address [ mask | mask-length ] ] command in the user view.
- To clear MBGP route flapping statistics, run the reset bgp multicast flap-info [ ip-address [ mask | mask-length ] | as-path-filter { as-path-list-number | as-path-list-name } | regrexp regrexp ] command in the user view.