Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Neighbor on an NBMA Network
Procedure
- Run system-view
The system view is displayed.
- Run ospf [ process-id ]
The OSPF process view is displayed.
- Run peer ip-address [ dr-priority priority ]
A neighbor is configured on the NBMA network.
- The parameter ip-address specifies the IP address of the neighbor.
- The parameter dr-priority priority specifies the DR priority of the neighbor. A larger value indicates a higher priority.
- Run commit
The configuration is committed.