Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring OSPFv3 Route Attributes
Applicable Environment
In actual applications, to meet the requirements of a complicated networking environment, you can change OSPFv3 routing policies by configuring OSPFv3 route attributes. Through the following procedures, you can:
Set the cost on the OSPFv3 interface.
Configure load balancing among equal-cost routes.
Pre-configuration Tasks
Before configuring OSPFv3 route attributes, complete the following tasks: