Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Controlling IPv6 IS-IS Route Selection
Pre-configuration Tasks
Before configuring IS-IS route selection, complete the following task:
Configuration Procedure
You can perform the following configuration tasks (excluding the task of Verifying the IPv6 IS-IS Route Selection Control Configuration) in any sequence as required.