Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring FRR for IPv6 Static Routes
Pre-configuration Tasks
Before configuring FRR for IPv6 static routes, complete the following task:
Configure link layer parameters and IPv6 addresses for interfaces to ensure that the link layer protocol on the interfaces is Up.
Procedure
- Run system-view
The system view is displayed.
- Run ipv6 route-static frr [ vpn-instance vpn-instance-name ]
FRR is enabled for public network IPv6 static routes.
To implement route backup by configuring FRR for ipv6 static routes, specify different preferences for these static routes.
- Run commit
The configuration is committed.
