Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for OSPFv3
Table 6-8 describes the default settings for OSPFv3.
Table 6-8 Default settings for OSPFv3
| Parameter | Default Setting |
|---|---|
| OSPFv3 | Disabled |
| The interval of sending Hello packets | For the interface of the broadcast type, the interval for sending Hello packets is 10 seconds. |
| The dead interval of the OSPFv3 neighbor | The dead interval of OSPFv3 neighbor is 40 seconds for the interface of broadcast type. |
| The period during which a switch keeps acting as a stub router. | 500 seconds |
| The bandwidth reference value used to calculate the link cost. | 100 Mbit/s |