Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an OSPFv3 Hostname
Compared with router IDs, Open Shortest Path First (OSPFv3) hostnames are easier to memorize. Therefore, using hostnames to identify routers can facilitate network management.
Pre-configuration Tasks
Before configuring a hostname, complete the following tasks:
- Configure an IP address for each interface to ensure that neighboring routers can use the IP addresses to communicate with each other.
Procedure
- Configure a dynamic OSPFv3 hostname.
- Run hostname [ hostname ]
An OSPFv3 dynamic hostname is configured.
If you specify hostname in hostname command, hostname is advertised as the dynamic hostname. If no hostname is specified in hostname command, the hostname specified in the sysname command is advertised as the dynamic hostname.
- Run hostname [ hostname ]
