Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Stub Router
Context
A stub router is used to control traffic and instructs other OSPF routers not to use it to forward data. Other OSPF routers can have a route to the stub router.
In the Router LSAs generated by a stub router, the costs of all links are set to the maximum value (65535).
Procedure
- Run system-view
The system view is displayed.
- Run ospf [ process-id ]
The OSPF process view is displayed.
- Run stub-router [ on-startup [ interval ] ]
A stub router is configured.
The parameter on-startup [ interval ] specifies the interval during which the switch acts as a stub router. By default, the interval is 500 seconds.
A stub router configured using this command bears no similarity to a switch in a stub area.
- Run commit
The configuration is committed.
