No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Multicast

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, PIM (IPv4), PIM (IPv6), MSDP, multicast VPN, multicast route management (IPv4), multicast route management (IPv6), IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Basic MLD Functions

Configuring Basic MLD Functions

Context

After basic MLD functions are configured on a multicast device interface connected to a user network segment, user hosts can access the IPv6 multicast network and receive IPv6 multicast data.

Pre-configuration Tasks

Before configuring basic MLD functions, configure an IPv6 unicast routing protocol to ensure that IPv6 routes between nodes are reachable.

Configuration Procedure

Enabling MLD and configuring the MLD version are mandatory. Other configurations are optional.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075361

Views: 25566

Downloads: 33

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next