No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Multicast

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, PIM (IPv4), PIM (IPv6), MSDP, multicast VPN, multicast route management (IPv4), multicast route management (IPv6), IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Basic MSDP Functions

Configuring Basic MSDP Functions

Context

MSDP allows you to set up MSDP peers between the PIM-SM domains, and the MSDP peers exchange SA messages to share multicast source information.

Pre-configuration Tasks

Before configuring the basic MSDP functions, configure the multicast function in each Protocol Independent Multicast Sparse Mode (PIM-SM) domain.

Configuration Procedure

Enabling MSDP and Configuring MSDP Peers are mandatory and other tasks are optional.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075361

Views: 24162

Downloads: 33

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next