No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Multicast

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, PIM (IPv4), PIM (IPv6), MSDP, multicast VPN, multicast route management (IPv4), multicast route management (IPv6), IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Summary of IGMP Configuration Tasks

Summary of IGMP Configuration Tasks

Table 2-7 IGMP configuration tasks

Scenario

Description

Task

Configure basic IGMP functions

To configure receiver hosts to join a multicast network and receive multicast data, you must configure basic IGMP functions on the switch interfaces connected to the receiver hosts.

Configuring Basic IGMP Functions

Optimize IGMP performance

With basic IGMP functions configured, a multicast switch can exchange IGMP messages with receiver hosts using default settings. You can optimize IGMP performance on the switch according to network security and performance requirements.

Optimizing IGMP Performance

Configure IGMP SSM mapping

The source-specific multicast (SSM) model allows IGMPv3 hosts to specify the multicast sources from which they want to receive data. To allow receiver hosts running IGMPv1 or IGMPv2 to use the SSM service, configure IGMP SSM mapping on the multicast switch.

Configuring IGMP SSM Mapping
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075361

Views: 25101

Downloads: 33

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next