No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Multicast

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, PIM (IPv4), PIM (IPv6), MSDP, multicast VPN, multicast route management (IPv4), multicast route management (IPv6), IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Multicast Network Management Function Configuration

Verifying the Multicast Network Management Function Configuration

Procedure

  • Run the display snmp-agent trap feature-name msdp all command to check the status of the MSDP trap function.
  • Run the display snmp-agent trap feature-name pim all command to check the status of the PIM trap function.
  • Run the display snmp-agent trap feature-name pim-std all command to check the status of the public PIM trap function.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075361

Views: 22842

Downloads: 33

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next