No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Multicast

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, PIM (IPv4), PIM (IPv6), MSDP, multicast VPN, multicast route management (IPv4), multicast route management (IPv6), IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring MLD Snooping Membership Fast-Update

Configuring MLD Snooping Membership Fast-Update

The membership fast-update function enables a multicast device to quickly respond to hosts' joining or leaving multicast groups. This feature helps improve multicast service efficiency and user experience.

Pre-configuration Tasks

Before configuring membership fast-update, perform the task of Configuring Basic MLD Snooping Functions.

Configuration Procedure

The following tasks are optional and can be performed in any sequence. Default values are recommended if there is no special requirement.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075361

Views: 21073

Downloads: 23

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next