No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - IP Multicast

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, PIM (IPv4), PIM (IPv6), MSDP, multicast VPN, multicast route management (IPv4), multicast route management (IPv6), IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing IGMP Snooping Over VXLAN Statistics

Clearing IGMP Snooping Over VXLAN Statistics


IGMP snooping over VXLAN statistics include the number of IGMP Report, Leave, Query, and Hello messages received in a BD. To re-collect IGMP snooping over VXLAN statistics in a period of time, run the reset command to set the current statistics to 0.

IGMP snooping over VXLAN statistics cannot be restored after being cleared. Exercise caution when you use the command.


  • Run the reset igmp snooping statistics { all | bridge-domain { all | bd-id } } command in the user view to clear IGMP snooping over VXLAN statistics.
Updated: 2019-04-20

Document ID: EDOC1100075361

Views: 30409

Downloads: 34

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next