No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - IP Multicast

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, PIM (IPv4), PIM (IPv6), MSDP, multicast VPN, multicast route management (IPv4), multicast route management (IPv6), IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Summary of IPv6 Multicast Route Management Configuration Tasks

Summary of IPv6 Multicast Route Management Configuration Tasks

Table 8-6 lists IPv6 multicast route management configuration tasks.

Table 8-6 IPv6 multicast route management configuration tasks
Task Description

Configuring IPv6 Multicast Load Splitting

Distributes multicast data to multiple equal-cost paths.

Configuring an IPv6 Multicast Boundary

Restricts the scope of multicast forwarding.

Disabling Software Forwarding for IPv6 Multicast Packets

Prevents packet loss and mis-sequencing caused by software forwarding.

Updated: 2019-04-20

Document ID: EDOC1100075361

Views: 30694

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next