No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Multicast

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, PIM (IPv4), PIM (IPv6), MSDP, multicast VPN, multicast route management (IPv4), multicast route management (IPv6), IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN, multicast network management.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling MLD Snooping

Enabling MLD Snooping

Context

Enabling global MLD snooping is the prerequisite for performing other MLD snooping configurations. Enabling MLD snooping in a VLAN is the prerequisite for making other MLD snooping configurations to take effect in the VLAN. If MLD snooping is disabled in a VLAN, other MLD snooping configurations can be performed successfully but do not take effect until MLD snooping is enabled in the VLAN.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run mld snooping enable

    MLD snooping is enabled globally.

    By default, MLD snooping is disabled globally.

  3. Run vlan vlan-id

    The VLAN view is displayed.

  4. Run mld snooping enable

    MLD snooping is enabled in a VLAN.

    By default, MLD snooping is disabled in a VLAN.

    You can run the mld snooping enable [ vlan { vlan-id1 [ to vlan-id2 ] } &<1-10> ] command in the system view to enable MLD snooping in multiple VLANs.

  5. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075361

Views: 20488

Downloads: 21

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next