No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Multicast

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, PIM (IPv4), PIM (IPv6), MSDP, multicast VPN, multicast route management (IPv4), multicast route management (IPv6), IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for IPv4 PIM

Default Settings for IPv4 PIM

Table 4-7 lists the default settings for IPv4 PIM.

Table 4-7 Default settings for IPv4 PIM
Parameter Default Setting

Multicast routing

Disabled

PIM-DM

Disabled

State refresh

Enabled after PIM-DM is enabled

PIM-SM

Disabled

Static RP address

Unspecified

C-RP interface

Unspecified

C-BSR interface

Unspecified

Listening of Auto-RP messages

Disabled

DR priority

1

SPT switchover conditions

First multicast packet received by the RP or the DR at the member side

Range of SSM group addresses

232.0.0.0/8

Bidir-PIM

Disabled

PIM BFD

Disabled

PIM silent

Disabled

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075361

Views: 22830

Downloads: 33

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next