No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, PIM (IPv4), PIM (IPv6), MSDP, multicast VPN, multicast route management (IPv4), multicast route management (IPv6), IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN, multicast network management.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Basic NTP Functions

Configuring Basic NTP Functions

Pre-configuration Tasks

Before the basic NTP functions are configured, configure the network layer address and routing protocol of an interface to ensure that NTP packets can reach the destination.

Configuration Procedure

Basic NTP configuration contains the configuration of the NTP primary clock and operating mode.

Translation
Download
Updated: 2020-01-07

Document ID: EDOC1100075362

Views: 33681

Downloads: 117

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next