No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Device Management, including device status query, hardware management, Information Center Configuration, NTP, Synchronous Ethernet Configuration, Fault Management Configuration, Energy-Saving Management Configuration, Performance Management Configuration, Maintenance Assistant Configuration, and OPS Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Log Output

Configuring Log Output

Pre-configuration Tasks

Before enabling log output, start the Switch and ensure that the device self-check detects no errors.

Configuration Procedure

Table 3-7 lists the configuration process for enabling log output.
Table 3-7 Configuration process for enabling log output

No.

Configuration Task

Description

Remarks

1

Enabling the Information Center

You can configure the information center only after the information center is enabled.

By default, the information center is enabled.

Steps 2 to 6 are optional and can be performed in any sequence.

2

(Optional) Naming an Information Channel

You can rename channels, making it easy to remember and use the channels.

3

(Optional) Configuring Log Filtering

If some logs are unnecessary, configure the device not to output these logs.

4

(Optional) Setting the Timestamp Format of Logs

To adjust the time format and time precision for information output, configure the timestamp.

5

(Optional) Setting the Severity of Logs

The system defines the default severity for each log. You can change the severity of a log according to severity level and urgency.

6

(Optional) Enabling Suppression of Statistics About Consecutive Repeated Logs

You can enable duplicate log statistics suppression to protect the information center against the impact of a large number of logs.

7

Configuring the Device to Output Logs to the Log Buffer

To view logs in the log buffer, configure the device to output logs to the log buffer.

Steps 7 to 11 can be configured in any sequence. You can configure the device to output logs to one or more destinations according to your needs.

8

Configuring the Device to Output Logs to a Log File

After logs are output to a log file, you can download the log file anytime to monitor device running based on the logs.

9

Configuring the Device to Output Logs to the Console

After logs are output to the console, you can view logs on the console (host from which you can log in to the device through the console interface) to monitor the status of the device.

10

Configuring the Device to Output Logs to a Terminal

After logs are output to a user terminal, you can view logs on the user terminal (the host from which you log in to the device through STelnet) to monitor the status of the device.

11

Configuring the Device to Output Logs to a Log Host

After configuring the device to output logs to a log host, you can view logs saved on the log host to monitor the status of the device.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075362

Views: 27981

Downloads: 103

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next