No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Device Management, including device status query, hardware management, Information Center Configuration, NTP, Synchronous Ethernet Configuration, Fault Management Configuration, Energy-Saving Management Configuration, Performance Management Configuration, Maintenance Assistant Configuration, and OPS Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Backing Up Electronic Labels

Backing Up Electronic Labels


Information in electronic labels helps locate network faults and replace hardware in batches. Therefore, backing up electronic labels is important.
  • If a network fault occurs, you can rapidly learn about hardware information using electronic labels, thereby improving hardware maintenance efficiency. In addition, you can efficiently analyze and trace hardware defects by analyzing information in electronic labels of the faulty hardware.

  • Before replacing hardware in batches, you can obtain accurate hardware deployment information based on information in the electronic labels recorded in the archive systems of customers' devices. Then you can evaluate the impact of hardware replacement and define policies to efficiently replace hardware in batches.

Electronic labels can be backed up to a file server or the local flash memory. Before backing up electronic labels to the file server, ensure that there are reachable routes between the device and file server. The file server can be an FTPor TFTP server.


  • Run backup device elabel [ slot slot-id [ card card-id ] ] filename

    Electronic labels are backed up to the flash memory.

  • Run backup device elabel [ slot slot-id [ card card-id ] ] ftp ftp-server-address filename username

    Electronic labels are backed up to the FTP server.

  • Run backup device elabel [ slot slot-id [ card card-id ] ] tftp tftp-server-address filename

    Electronic labels are backed up to the TFTP server.

Updated: 2019-04-20

Document ID: EDOC1100075362

Views: 26123

Downloads: 102

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next