No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Device Management, including device status query, hardware management, Information Center Configuration, NTP, Synchronous Ethernet Configuration, Fault Management Configuration, Energy-Saving Management Configuration, Performance Management Configuration, Maintenance Assistant Configuration, and OPS Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying Interface Status

Displaying Interface Status

Context

View the configuration of an interface.

  • After configurations are complete in an interface view, you can view the configuration about this interface to check whether the configuration is correct.

View the status of an interface.

  • You can view the status of an interface to monitor the interface or locate interface faults.

Procedure

  • View the configuration of a specified interface.
    1. Run system-view

      The system view is displayed.

    2. Run interface interface-type interface-number

      The interface view is displayed.

    3. Run display this

      The configuration of the current interface is displayed.

  • View the status of an interface using either of the following methods.

    Method 1:

    1. Run display interface [ interface-type [ interface-number ] ]

      The status of the specified interface is displayed.

    Method 2:

    1. Run system-view

      The system view is displayed.

    2. Run interface interface-type interface-number

      The interface view is displayed.

    3. Run display this interface

      The status of the specified interface is displayed.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075362

Views: 24884

Downloads: 102

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next