- About This Document
- Displaying the Device Status
- Displaying Device Information
- Displaying the ESN
- Displaying Versions
- Displaying Power Supply Information
- Displaying the Power
- Displaying the Temperature
- Displaying Fan Status
- Displaying CPU Usage
- Displaying Memory Usage
- Displaying Interface Status
- Displaying Electronic Labels
- Displaying the System MAC Address
- Displaying the Current Configuration
- Displaying Diagnostic Information
- Displaying Health Status
- Displaying Information About an Optical Module
- Hardware Management
- Powering On or Off a Subcard
- Enabling the License for Cards in a Slot
- Backing Up Electronic Labels
- Resetting a Device or Subcard
- Pre-configuring Devices
- Configuring Active/Standby Switchover
- Disabling the Alarm Function for Optical Modules That Are Not Certified for Huawei Ethernet Switches
- Configuring the CPU Usage Alarm Threshold
- Configuring the Memory Usage Alarm Threshold
- Configuring the Interval for Updating Power Consumption Data
- Configuring the System Resource Mode
- Setting the UAT Resource Allocation Mode and Hash Mode
- Configuring the Status of the Device ID Indicator
- Configuring the Large Layer 3 Interface Mode
- Configuring the Layer 3 Resource Allocation Mode
- Configuring EEDB Resource Specifications for RIOT
- Configuring the Device MAC Address
- Setting the Working Power of Power Modules
- Configuring the Channel Number for the Center Wavelength of DWDM Optical Modules
- Configuring the Number of Tokens for the Channel from the FEI to LDM
- Information Center Configuration
- Overview of the Information Center
- Understanding the Information Center
- Application Scenarios for the Information Center
- Default Settings for the Information Center
- Configuring Log Output
- Enabling the Information Center
- (Optional) Naming an Information Channel
- (Optional) Setting the Output Priority for Information Center Packets
- (Optional) Configuring Log Filtering
- (Optional) Setting the Timestamp Format of Logs
- (Optional) Setting the Severity of Logs
- (Optional) Enabling Suppression of Statistics About Consecutive Repeated Logs
- Configuring the Device to Output Logs to the Log Buffer
- Configuring the Device to Output Logs to a Log File
- Configuring the Device to Output Logs to the Console
- Configuring the Device to Output Logs to a Terminal
- Configuring the Device to Output Logs to a Log Host
- Verifying the Log Output Configuration
- Configuring Trap Output
- Enabling the Information Center
- (Optional) Naming an Information Channel
- (Optional) Setting the Output Priority for Information Center Packets
- (Optional) Configuring Trap Filtering
- (Optional) Setting the Timestamp Format of Traps
- Configuring the Device to Output Traps to the Trap Buffer
- Configuring the Device to Output Traps to a Log File
- Configuring the Device to Output Traps to the Console
- Configuring the Device to Output Traps to a Terminal
- Configuring the Device to Output Traps to a Log Host
- Configuring the Device to Output Traps to an SNMP Agent
- Verifying the Trap Output Configuration
- Configuring Debugging Message Output
- Enabling the Information Center
- (Optional) Naming an Information Channel
- (Optional) Setting the Output Priority for Information Center Packets
- (Optional) Setting the Timestamp Format of Debugging Messages
- Configuring the Device to Output Debugging Messages to the Console
- Configuring the Device to Output Debugging Messages to the Terminal
- Verifying the Debugging Message Output Configuration
- Maintaining the Information Center
- Configuration Examples for the Information Center
- NTP Configuration
- Overview of NTP
- Understanding NTP
- Application Scenarios for NTP
- Licensing Requirements and Limitations for NTP
- Configuring Basic NTP Functions
- Configuring the NTP Client Clock
- Configuring the Local Source Interface for Sending and Receiving NTP Packets
- Limiting the Number of Local Dynamic NTP Sessions
- Configuring NTP Access Control
- Maintaining NTP
- Configuration Examples for NTP
- Synchronous Ethernet Configuration
- Overview of Synchronous Ethernet
- Understanding Synchronous Ethernet
- Application Scenarios for Synchronous Ethernet
- Licensing Requirements and Limitations for Synchronous Ethernet
- Configuring the Clock Link Mode for a Stack Member Port in a Stack
- Configuring a Clock Source
- Configuring the Clock Source Selection Mode
- (Optional) Configuring Attributes for a Clock Source
- Enabling Frequency Deviation Detection for Clock Signals
- Configuring the Frequency Deviation Alarm
- Setting a Mapped SSM Quality Level of a UNK Clock Source
- Setting the Maximum SSM Quality Level of Output Signals
- Configuring the Recovery Mode of a Clock Source
- Configuring the Hold Time of a Clock Source After Its Signals Become Invalid
- Configuring the WTR Time for a Clock Source
- Verifying the Clock Source Configuration
- Configuration Examples for Synchronous Ethernet
- 1588v2 (PTP) Configuration
- Overview of 1588v2
- Understanding 1588v2
- Application Scenarios for 1588v2
- Licensing Requirements and Limitations for 1588v2
- Default Settings for 1588v2
- Configuring Dynamic 1588v2 (Using Switches as OCs)
- Configuring the Clock Link Mode for a Stack Member Port in a Stack
- Configuring an Encapsulation Mode for 1588v2 Messages
- Importing an External Clock Source
- Configuring Clock Source Attributes Used for BMC Selection
- Enabling 1588v2 Globally
- Enabling 1588v2 on an Interface
- (Optional) Enabling Access Control of 1588v2 Clock Sources
- (Optional) Configuring Time Attributes for 1588v2 Messages
- (Optional) Configuring UTC Time Correction
- Verifying the Dynamic/Static 1588v2 Configuration
- Configuring Dynamic 1588v2 (Using Switches as BCs)
- Configuring the Clock Link Mode for a Stack Member Port in a Stack
- Configuring an Encapsulation Mode for 1588v2 Messages
- Importing an External Clock Source
- Configuring Clock Source Attributes Used for BMC Selection
- Enabling 1588v2 Globally
- Enabling 1588v2 on an Interface
- (Optional) Enabling Access Control of 1588v2 Clock Sources
- (Optional) Configuring Time Attributes for 1588v2 Messages
- (Optional) Configuring UTC Time Correction
- Verifying the Dynamic/Static 1588v2 Configuration
- Configuring Static 1588v2 (Using Switches as OCs)
- Configuring the Clock Link Mode for a Stack Member Port in a Stack
- Configuring an Encapsulation Mode for 1588v2 Messages
- Importing an External Clock Source
- Enabling 1588v2 Globally
- Enabling 1588v2 on an Interface
- Specifying the 1588v2 Interface Status
- (Optional) Configuring Time Attributes for 1588v2 Messages
- (Optional) Configuring UTC Time Correction
- Verifying the Dynamic/Static 1588v2 Configuration
- Configuring Static 1588v2 (Using Switches as BCs)
- Configuring the Clock Link Mode for a Stack Member Port in a Stack
- Configuring an Encapsulation Mode for 1588v2 Messages
- Importing an External Clock Source
- Enabling 1588v2 Globally
- Enabling 1588v2 on an Interface
- Specifying the 1588v2 Interface Status
- (Optional) Configuring Time Attributes for 1588v2 Messages
- (Optional) Configuring UTC Time Correction
- Verifying the Dynamic/Static 1588v2 Configuration
- Maintaining 1588v2
- Configuration Examples for 1588v2
- Fault Management Configuration
- Energy-Saving Management Configuration
- Performance Management Configuration
- Maintenance Assistant Configuration
- OPS Configuration
- PADS Configuration