No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Device Management, including device status query, hardware management, Information Center Configuration, NTP, Synchronous Ethernet Configuration, Fault Management Configuration, Energy-Saving Management Configuration, Performance Management Configuration, Maintenance Assistant Configuration, and OPS Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Memory Usage Alarm Threshold

Configuring the Memory Usage Alarm Threshold


Memory usage is an important indicator used to evaluate device performance. A high memory usage will cause service faults. During data processing, if the device can generate an alarm when high memory usage occurs, you can effectively monitor memory usage and optimize system performance to ensure system stability. To implement this function, you can set two thresholds:

  • Memory usage alarm threshold

    When memory usage reaches this threshold, the system generates an alarm.

  • Memory usage alarm clear threshold

    When memory usage falls below this threshold, the system clears the alarm.


  1. (Optional) Run display memory threshold [ slot slot-id ]

    The memory usage configuration is displayed.

  2. Run system-view

    The system view is displayed.

  3. Perform any of the following operations as required:
    • Run the set memory threshold threshold-value [ restore restore-threshold-value ] [ slot slot-id ] command to configure the memory usage alarm threshold and alarm clear threshold of a specified device.

      By default, the memory usage alarm threshold is 95% and the alarm clear threshold is 75%.

    • Run the set process memory threshold threshold [ slot slot-id ] command to configure the memory usage alarm threshold of a single process.

      By default, the memory usage alarm threshold of a single process is 70%.

  4. Run commit

    The configuration is committed.

Updated: 2019-04-20

Document ID: EDOC1100075362

Views: 25905

Downloads: 102

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next