No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Network Management and Monitoring

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, NETCONF, OpenFlow, LLDP, NQA, Mirroring, Packet Capture, Packet Trace, Path and Connectivity Detection Configuration, NetStream, sFlow, and iPCA.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the SNMP Proxy Configuration

Verifying the SNMP Proxy Configuration


  • Check SNMP proxy configurations on the middle-point device:

    • Run the display snmp-agent proxy community command to check SNMP proxy community information.
    • Run the display snmp-agent proxy rule command to check proxy rules for SNMP packets.
    • Run the display snmp-agent proxy target-host command to check target host information.
    • Run the display snmp-agent usm-user command to check SNMPv3 proxy user information.
    • Run the display snmp-agent proxy statistics command to check statistics about SNMP proxy packets.

  • Check SNMP configurations on the managed device:

Updated: 2019-04-20

Document ID: EDOC1100075365

Views: 41444

Downloads: 127

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next