No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Network Management and Monitoring

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, NETCONF, OpenFlow, LLDP, NQA, Mirroring, Packet Capture, Packet Trace, Path and Connectivity Detection Configuration, NetStream, sFlow, and iPCA.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Device to Communicate with an NMS Through SNMPv3 (AAA Local User)

Configuring a Device to Communicate with an NMS Through SNMPv3 (AAA Local User)


After the SNMPv3 is configured, the NMS and device communicate with each other through SNMPv3. To ensure smooth communication between the NMS and the device, you need to configure the related parameters on both the NMS and device. This section describes only the configurations on device. For details about the NMS configuration, see the relevant NMS configuration manual.

SNMPv3 supports authentication using authentication, authorization, and accounting (AAA) user names. The network administrator can use the AAA local user name in the SNMPv3, FTP, Telnet, and SSH features in order to manage the device by using a uniform user name.

Pre-configuration Tasks

Configuring a routing protocol to generate a reachable route between the device and NMS

Configuration Process

Among the following configuration tasks, the tasks of Configuring AAA Local User and Configuring Basic SNMPv3 Functions are mandatory, and the other tasks are optional and can be performed at any sequence.

To implement advanced management, the following operations are required:
Updated: 2019-04-20

Document ID: EDOC1100075365

Views: 35252

Downloads: 123

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next