No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, NETCONF, OpenFlow, LLDP, NQA, Mirroring, Packet Capture, Packet Trace, Path and Connectivity Detection Configuration, NetStream, sFlow, and iPCA.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring IPv4 Original Flow Statistics Export

Configuring IPv4 Original Flow Statistics Export

Pre-configuration Tasks

Once the export of IPv4 original flow statistics is configured, the NDE collects statistics about IPv4 flows and exports statistics about each flow to the NetStream server for further analysis.

Before configuring IPv4 original flow statistics export, complete the following tasks:

  • Set physical parameters of interfaces.
  • Set the link-layer attributes of each interface.

Configuration Process

The configuration tasks of IPv4 original flows can be performed in any sequence.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075365

Views: 36540

Downloads: 123

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next