No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Network Management and Monitoring

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, NETCONF, OpenFlow, LLDP, NQA, Mirroring, Packet Capture, Packet Trace, Path and Connectivity Detection Configuration, NetStream, sFlow, and iPCA.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for RMON

Application Scenarios for RMON

On a live network, RMON implements the monitoring and statistics collection functions on a network segment. On the network shown in Figure 2-1, The device connects to the NMS through the network. The SNMP Agent is deployed on the device to monitor 10GE1/0/1, and the statistics function and alarm function are enabled on the interface.

Figure 2-1 Networking diagram of RMON
  • To collect traffic statistics on an Ethernet interface, realtime and historical traffic and packet statistics, monitor port usage and collect error packet data.
  • To monitor the traffic bytes on the interface, you can configure the function to process an event as recording a log and set a threshold. When the traffic bytes in a minute exceed the threshold, a log is recorded.
  • To monitor broadcast and multicast traffic on the network, configure the function to process an event as sending a trap message and set a threshold. When the number of broadcast and multicast packets exceeds a predefined threshold, a trap message is sent to the NMS.
Updated: 2019-04-20

Document ID: EDOC1100075365

Views: 33444

Downloads: 121

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next