No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, NETCONF, OpenFlow, LLDP, NQA, Mirroring, Packet Capture, Packet Trace, Path and Connectivity Detection Configuration, NetStream, sFlow, and iPCA.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring the Running Status of iPCA

Monitoring the Running Status of iPCA

Context

During routine maintenance, run the following commands in any view to check iPCA performance statistics and monitor iPCA running status.

Procedure

  • Run the display ipfpm statistic-type { loss | oneway-delay | twoway-delay } instance instance-id command in any view to check performance statistics of the specified measurement instance in the IP FPM measurement system.
  • Run the display ipfpm statistic-type { loss | oneway-delay | twoway-delay } instance instance-id ach ach-id command in any view to check hop-by-hop performance statistics in the specified ACH of the IP FPM measurement system.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075365

Views: 33841

Downloads: 121

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next