No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, NETCONF, OpenFlow, LLDP, NQA, Mirroring, Packet Capture, Packet Trace, Path and Connectivity Detection Configuration, NetStream, sFlow, and iPCA.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing the OpenFlow User Policy Table

Clearing the OpenFlow User Policy Table

Context

If the OpenFlow connection between a switch and controller is severed, the switch will not actively delete the user policy entries delivered by the controller through Flow_Mod. To delete these user policy entries, run the following command.

User policy entries cannot be restored after being cleared. Exercise caution when you run the clear command.

Procedure

  • Run the clear openflow flows standard { all | entry entry-id } command in the user view to clear the user policy table information delivered through Flow_Mod.

    NOTE:

    The CE6880EI and CE5880EI do not support Flow_Mod.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075365

Views: 33591

Downloads: 121

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next