Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an NQA Test Instance
You can configure an NQA test instance to perform an NQA test of a specified type.
Pre-configuration Tasks
Before configuring the NQA test instance, complete the following tasks:
- Ensure that the device is running properly.
- Configure routing to ensure reachable routes between devices involved in the test.
NOTE: The pre-configuration tasks differ from different test instances. For details, see the configuration of each test instance.
Configuration Process
The following optional test instances are independent of each other:
- Configuring an ICMP Test Instance
- Configuring an ICMP Jitter Test Instance
- Configuring a TCP Test Instance
- Configuring a Trace Test Instance
- Configuring a UDP Jitter Test Instance
- Configuring the LSP Ping Test
- Configuring the LSP Trace Test
- Configuring a DNS Test
- Verifying the NQA Test Instance Configuration
Previous
