No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, NETCONF, OpenFlow, LLDP, NQA, Mirroring, Packet Capture, Packet Trace, Path and Connectivity Detection Configuration, NetStream, sFlow, and iPCA.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Mirroring Configuration

Mirroring Configuration

The mirroring function copies packets to a specified destination so that you can analyze packets to monitor the network and rectify faults.

NOTE:

The switch supports the mirroring function, which is used for network detection and fault management and may involve personal communication information. Huawei cannot collect or store user communication information without permission. It is recommended that relevant functions used to collect or store user communication information be enabled in adherence with applicable laws and regulations. During the usage and storage of user communication information, measures must be taken to protect user communication information.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075365

Views: 33404

Downloads: 121

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next