No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, NETCONF, OpenFlow, LLDP, NQA, Mirroring, Packet Capture, Packet Trace, Path and Connectivity Detection Configuration, NetStream, sFlow, and iPCA.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Destination Collector

Configuring a Destination Collector

When you configure Telemetry static subscription to the data sampled, you need to create a destination group and specify a destination collector to which the data is sent.

Context

When static subscription is configured, a device functions as a client and a collector functions as a server. To statically subscribe to the data sampled, you need to configure the IP address and port number of a destination collector, and the protocol and encryption mode for data sending.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run telemetry

    The Telemetry view is displayed.

  3. Run destination-group destination-name

    A destination group to which the data sampled is sent is created, and the Destination-group view is displayed.

    By default, no destination group to which the data sampled is sent is created.

  4. Run ipv4-address ip-address port port [ vpn-instance vpn-instance ] [ protocol grpc [ no-tls ] ]

    An IP address and a port number are configured for the destination collector, and a protocol and an encryption mode are configured for data sending.

    By default, no IP address or port number is configured for the destination collector, and no protocol or encryption mode is configured for data sending.

    NOTE:

    This command can be run for no more than five times for each destination group.

    Both this command and the protocol command in the Subscription view can be run to configure a protocol and encryption mode for the target collector. If the target collector is associated with the subscription, command configurations take effect based on the following rules:
    • If the protocol command has been run in the Subscription view, the protocol and encryption mode configured in the Subscription view take effect.

    • If the protocol command is not run in the Subscription view, the protocol and encryption mode configured in the Destination-group view take effect.

  5. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075365

Views: 41050

Downloads: 127

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next