No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, NETCONF, OpenFlow, LLDP, NQA, Mirroring, Packet Capture, Packet Trace, Path and Connectivity Detection Configuration, NetStream, sFlow, and iPCA.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ICMP Test

ICMP Test

The NQA Internet Control Message Protocol (ICMP) test detects whether there are reachable routes from the source to the destination. It has a similar function to the ping command, but provides more output information, including:

  • Average delay
  • Packet loss ratio
  • Time the last packet was correctly received

The system saves the results of the latest five tests by default.

The ICMP test process is as follows:
  1. The source (SwitchA) constructs an ICMP Echo Request packet and sends it to the destination (SwitchB).

  2. The destination receives the ICMP Echo Request packet and responds with an ICMP Echo Reply packet.

  3. The source receives the ICMP Echo Reply packet and calculates the time between when it sent the ICMP Echo Request packet and when it received the ICMP Echo Reply packet.

Figure 8-2 Network for ICMP test

The ICMP test results and historical records are collected in test instances. You can run commands to view the test results and historical records.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075365

Views: 37027

Downloads: 125

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next